Understanding life – up to 80 thousand hours, which is equivalent to 25 years of real outdoor street lighting. This is due to filament due to the nature of the nonthermal emission of light. For example, gallogennuyu lamp during this period will have to replace about 100 times, and metal – 30. JPMorgan Chase has much experience in this field. stable operation in all climatic conditions. Energy saving 30% compared with the street lamps with HPS and 70% Compared with street lights and lamp DRL City, re-10 000 svetotochek saves about 2 GW of electricity and nearly 5 million rubles a year (at prices of 2008.) that, given the rising cost of electricity tariffs in 10 years will be at least 150 million rubles. Term 3-4 years payback Environmental security and no need for recycling. LED street and industrial lighting does not require special disposal because do not contain mercury, its derivatives and other toxic or harmful components.
Due to the lack of street lamps and industrial ZERS glass bulb and the filament (or burners) – high mechanical strength, vibration and reliability. Resistance to voltage drops traffic safety and saving lives – providing better visibility, clarity of boundaries and the depth perception of space due to the greater contrast (400 times), lack of blinding effect through a specially crafted of luminous flux. Color rendering index of 80-85 The prevalence of street light output and industrial LED lighting is 100%, whereas the standard street lamps – 60-75%. Powerful LEDs are ideal point sources of light with built-in corrective optics that provides an ideal form defined patterns of light thread (task almost impossible for other sources). Environmentally friendly – eliminates disposal costs and save the environment Lack of harmful effect of low-frequency pulsations (Stroboscopic effect) is inherent in fluorescent and gas discharge light sources. Fluorescent and HID lights flicker at different rates, which adversely affects the human nervous system, increasing irritability and fatigue. The luminous flux of LEDs is constant, as well as natural sunlight, which provides psychological comfort.
Compliance with sanitary standards – the lack of ultraviolet radiation, capable of causing skin cancer minimum heating of the environment – can be used in indoor industrial lighting and save energy for air conditioning complete absence of additional risk overload power grids in the time of inclusion. Supply current of LED street lighting and industrial is 0,4 0,6 A, while the discharge lamp with the lamp supply current 2.2 A and 4.5 A. launcher LED street and industrial lighting (as opposed to fixtures with discharge lamps) have the ability to adjust the brightness by reducing the supply voltage. SNiP 23-05-95 allows for energy savings at night reduced light levels for street lighting by 30-50% (paragraph 7.44). The use of outdoor LED lighting ZERS allows these recommendations by a decline, the supply voltage. This does not affect spectral composition of light and color. Saving money is just the point when negotiating the design elektropotrebleniya.Pri authorized connection point of energy consumption (both street and industrial) will be charged for the amount of kilowatts. An additional important advantage of outdoor and industrial lighting fixtures ZERS is instantaneous ignition when the supply voltage and independence efficiency from low ambient temperatures. Widely used at present for street lighting lamps with HPS and DRL poorly run at low temperatures. When mounting LED street lighting and industrial ZERS cable required a smaller cross section, which is also an article of economy. The real support for programs of the President and the Government to introduce nanotechnology and conservation.